Thin walls & assemblies
IGP1200S is specifically positioned in the current Zorix TDS for thin-wall structures and assembled parts where stable geometry and usable mechanical performance matter.
Materials for production SLS
Materials that expand your business.
Start with IGP1200S, Zorix's industrial PA12 material for thin walls, assemblies and large parts. Extend your production range with additional PA12 options for toughness, black functional parts and higher-stiffness applications.
Specifically optimized for Zorix SLS systems
Flagship material
IGP1200S.
IGP1200S.
Industrial PA12.
IGP1200S is positioned as the primary Zorix production material: a black PA12 developed for industrial SLS and specified for thin-wall parts, assemblies, prototypes, tooling and low-volume production.
IGP1200S
Advanced SLS nylon for thin walls, assemblies & large parts.
The current TDS describes IGP1200S as tough, dimensionally stable, heat- and corrosion-resistant, with a smooth, paint-ready surface.
BLACK PA12
THIN WALLS
ASSEMBLIES
LARGE PARTS
LOW-VOLUME PRODUCTION
45 MPa
Typical Tensile Strength
32 %
Elongation at Break
138 °C
HDT @ 0.45 MPa
1390 MPa
Tensile Modulus
1.05 g/cm³
Typical Part Density
42 kJ/m²
Unnotched Izod Impact Strength
Built around production parts
One PA12. A wide production window.
Large functional parts
Use the material with MEGA I's larger build envelope for housings, fixtures, prototypes and production components that benefit from SLS design freedom.
Production-ready surface
The current TDS characterizes the surface as smooth and paint-ready, supporting parts that will move from printing into downstream finishing workflows.
Additional production materials
More materials for more jobs.
Alongside IGP1200S, Zorix can support additional material options. Supplier prefixes are removed from the customer-facing names: 1211PA, 1200F and 1200CF.
PA12 / WHITE
1211PA
White PA12 Powder
0.98Part Density / g·cm⁻³
185°CMelting Point
148.2°CHDT @ 0.45 MPa
38.89Tensile Strength X / MPa
PA12 / BLACK
1200F
Black PA12 Powder
0.99Part Density / g·cm⁻³
184.5°CMelting Point
146.1°CHDT @ 0.45 MPa
39.01Tensile Strength X / MPa
GLASS-BEAD PA12 / BLACK
1200CF
Glass-Bead PA12 Powder
0.96Part Density / g·cm⁻³
181°CMelting Point
155°CHDT @ 0.45 MPa
51.34Tensile Strength X / MPa
Material comparison
Compare the production range.
Values below are taken from the material data you supplied. IGP1200S is reported as a single typical value in the Zorix TDS; 1211PA, 1200F and 1200CF report directional mechanical values.
| Property | IGP1200S | 1211PA | 1200F | 1200CF |
|---|---|---|---|---|
| Material Type | Industrial PA12 | PA12 | PA12 | Glass-Bead PA12 |
| Color | Black | White | Black | Black |
| Bulk Density | 0.57 g/cm³ | 0.49 g/cm³ | 0.53 g/cm³ | 0.45 g/cm³ |
| Part Density | 1.05 g/cm³ | 0.98 g/cm³ | 0.99 g/cm³ | 0.96 g/cm³ |
| Melting Point | 180°C | 185°C | 184.5°C | 181°C |
| HDT @ 1.82 MPa | 46°C | 84.5°C | 73.1°C | 120°C |
| HDT @ 0.45 MPa | 138°C | 148.2°C | 146.1°C | 155°C |
| Tensile Strength | 45 MPa | 38.89 / 38.66 / 38.84 MPa (X/Y/Z) | 39.01 / 38.96 / 37.26 MPa (X/Y/Z) | 51.34 / 44.70 / 33.88 MPa (X/Y/Z) |
| Tensile Modulus | 1390 MPa | 1297.89 / 1303.82 / 1327.59 MPa | 1254.34 / 1294.60 / 1327.87 MPa | 2543.56 / 1955.23 / 1526.97 MPa |
| Elongation at Break | 32% | 15.63 / 17.69 / 6.41% | 28.92 / 32.51 / 12.32% | 11.28 / 14.79 / 3.21% |
Material test methods differ between the IGP1200S TDS and the supplier property sheet. Do not treat cross-material comparisons as a substitute for application-specific validation.
IGP1200S, tested on MEGA I.
The current Zorix TDS states that the reported parts were printed using a Zorix MEGA I system with IGP1200S PA12 powder.
±200 µm
Dimensions < 100 mm
±0.2%
Dimensions ≥ 100 mm
IGP1200S storage & handling
Built for a controlled production environment.
01
Storage Conditions
- Store in a cool, dry place.
- Avoid direct sunlight.
- Relative humidity: < 50%.
- Recommended ambient temperature: 15–25°C.
02
Handling Precautions
- Wear a dust mask and gloves.
- Ensure adequate ventilation.
- Reseal tightly after use.
03
Packaging
- Vacuum bag inside a cardboard carton.
- Net weight: 10 kg / carton.
- Custom packaging sizes available upon request.
Choose the right production material
Start with the part, not the powder.
Send us your application, mechanical requirements and production volume. We'll help evaluate which material is the better starting point for your MEGA I workflow.